Verisign just released its Q1 2017 DDoS Trends Report, which represents a unique view into the attack trends unfolding online, through observations and insights derived from distributed denial of service (DDoS) attack mitigations enacted on behalf of Verisign DDoS Protection Services.
Verisign saw a 23 percent decrease in the number of attacks in Q1 2017; however, the average peak attack size increased 26 percent compared to the previous quarter. Overall, average peak attack sizes have been noticeably larger since Q1 2016, with peak sizes over 10 Gigabits per second (Gbps).
The largest volumetric and highest intensity DDoS attack observed by Verisign in Q1 2017 was a multi-vector attack that peaked over 120 Gbps and around 90 Million packets per second (Mpps). This attack sent a flood of traffic to the targeted network in excess of 60 Gbps for more than 15 hours. The attack was notable because the attackers were persistent, sending attack traffic on a daily basis for over two weeks. The attack consisted primarily of TCP SYN and TCP RST floods of varying packet sizes and employed one of the signatures associated with the Mirai IoT botnet. The event also included UDP floods and IP fragments which increased the volume of the attack.
Key DDoS attack trends and observations
Fifty-seven percent of the DDoS attacks mitigated by Verisign in Q1 2017 employed multiple attack types.
Forty-six percent of DDoS attacks were UDP Floods.
TCP-based attacks were the second most common attack vector, making up 33 percent of attack types in the quarter.
The IT/Cloud/SaaS industry, representing 58 percent of mitigation activity, was the most frequently targeted industry for the tenth consecutive quarter. The Financial Sector industry experienced the second highest number of DDoS attacks, representing 28 percent of mitigation activity. This is a large increase from the 7 percent mitigation during the prior quarter.
For more DDoS Trends in Q1 2017, download the full report, and be sure to check back in a few months when we release our Q2 2017 DDoS Trends Report.
Launching a DDoS attack is much more accessible to attackers thanks to the rise of cloud computing, cheap hosting, readily available bandwidth and open-source attack tools. From low-skilled teenagers aiming to cheat while playing online games to cybercriminals looking to supplement their income by renting out their botnets for opportunistic attacks, the DDoS-for-hire market is booming.
User Datagram Protocol (UDP) flood attacks continue to dominate in Q3 2016, making up 49 percent of the total attacks in the quarter. The most common UDP flood attacks mitigated were Domain Name System (DNS) reflection attacks, followed by Network Time Protocol (NTP) reflection attacks.
The highest intensity flood attack in Q3 2016 was a TCP SYN flood that peaked at approximately 60 Gigabits per second (Gbps) and 150 Million packets per second (Mpps). This flood attack is one of the highest packets per second attacks ever observed by Verisign, surpassing the previous flood of 125 Mpps mitigated by Verisign in Q4 2015.
The largest attack in Q3 2016 utilized the Generic Routing Encapsulation (GRE) protocol (IP protocol 47) and peaked at 250+ Gbps and 50+ Mpps. This is the first time Verisign observed this type of attack against our customer base.
Layer 7 attacks are some of the most difficult attacks to mitigate because they mimic normal user behavior and are harder to identify. The application layer (per the Open Systems Interconnection model) consists of protocols that focus on process-to-process communication across an IP network and is the only layer that directly interacts with the end user. A sophisticated Layer 7 DDoS attack may target specific areas of a website, making it even more difficult to separate from normal traffic. For example, a Layer 7 DDoS attack might target a website element (e.g., company logo or page graphic) to consume resources every time it is downloaded with the intent to exhaust the server. Additionally, some attackers may use Layer 7 DDoS attacks as diversionary tactics to steal information.
Every industry is at risk as DDoS attacks continue to increase in frequency, consistency and complexity. Comparing year-over-year attack activity, Verisign mitigated 75 percent more attacks in Q2 2016 than in Q2 2015. The largest attack mitigated by Verisign in Q2 2016 peaked at 250+ Gbps before settling in at 200+ Gbps for almost two hours.
Verisign also observed a growing trend of low-volume application layer, or Layer 7, attacks that probe for vulnerabilities in application code and exploit HTTP/S field headers within request packets to disable applications. These attacks were frequently coupled with high-volume UDP flood attacks to distract the victim from the Layer 7 attack component, often requiring multiple and advanced filtering techniques.
Every industry is at risk as DDoS attacks continue to increase in size, frequency and sophistication. The most notable observation last quarter is the increase in DDoS attack activity, which was at its highest since the inception of Verisign’s DDoS Trends Report in Q1 2014. Comparing year-over-year attack activity, Verisign mitigated 111 percent more attacks in Q1 2016 than in Q1 2015.
Every industry is at risk as DDoS attacks continue to increase in size, sophistication and frequency. The most notable observation last quarter is the increase in DDoS attack activity, which was at its highest since the inception of Verisign’s DDoS Trends Report in Q1 2014. Comparing year-over-year attack activity, Verisign mitigated 85 percent more attacks in Q4 2015 than in Q4 2014. Some customers were hit with persistent, repeated attacks over the quarter.
The most notable observation is DDoS attack activity increased in Q3 to the highest it has been in any quarter over the last two years. Quarter over quarter, Verisign mitigated 53 percent more attacks in the third quarter this year than in the preceding quarter.